ALUWEDO Embossed Aluminum Composite Panel

The embossed ALUWEDO has different colors available.

Protruding and sunken brings people strong third dimension. It’s a better choice to make your wall compared with normal Aluminium Composite Panel; this has a great improvement for appearance and texture.

Application scopes:

Building exterior &interior curtain walls

Decoration of reformation story addition for old building

Decoration of interior walls, ceilings, bathrooms, kitchens, balconies, and shops door decorations

Advertisement board, display platforms and signboards, wallboard, and ceilings for tunnel

Industrial materials, vehicle, and boat materials

Customized specifications are accepted

Test report

Item	Technical Requirements
Item	Exterior panel	Interior panel
Coating Thickness(test)	≥25μm	≥16μm
Coating Adhesive(test)	≥1 step
Gloss Tolerance(test)	limit of error≤10
Pencil Hardness(test)	≥HB
Boiling Water Resistance(test)	No change
Color Difference test	≤2.0	—
Acid Resistance test	No change
Alkaline Resistance test	No change
Grinding Resistance test	≥5μm	—
Bending Test	≥100MPa	≥60MPa
180°Peel Strength	≥7N/mm	≥4N/mm

Product Specification:

Thickness:2-- -6mm (Better choice in 3mm, 4mm)

Width: 1000— 2000mm (Better choice 1220mm, 1250mm , 1500mm .2000mm)

Length: As required

Let’s see it in a little more detail

Punching and die-cutting

The composite panel can be punched and die-cut with CNC. The result ranges from the creation of pointillist or artistic style patterns to complicated and detailed drawings on the facade.

Edging

There are three types of edging:

· Simple, which hides the edging

· Double interior, hides the edge and part of the back

· Double outside, hides the edge and extends a flange that hides the joints with other panel sheets.

Roller bending

The panel can be easily bent following the minimum necessary bending radii. To do it, it is best to use bending machines with 3/4 rolls.

By bending the product, columns can be covered, concealing the corners with a rounded appearance, etc.

Stamping and engraving

With more limitations than the previous transformations, we find that in the panel, through modifications in its depth, it is possible to make engravings creating forms without having to get to cut-die the panel.

3D Forming

The 3D forming process, besides of being used to manufacturing aluminium composite panel for hanging systems, can also be used to create projected three-dimensional surfaces.

Milling

The milling of the panel gives results that differ from other types of processing such as punching and, of course, from the usual conception of the composite panel as a cassette-type tray. It can be made with CNC, with a wall saw or a portable one. The partial milling of the panel allows the subsequent folding of the pieces to give them creative shapes.

Quick feedback mail: [email protected]

7*24 hours quick feedback by mail and whatsapp/wechat on line: 008613962238789

Request a quote

Feedback form contact with us